New Arrivals/Restock

800W Glue Dispenser, 110V 10000CPS Hot Melt Glue Machine, 6.61lbs/h Solvent Capacity 302-392℉ Temp Control YT-X001 Model Adhesive Dispenser Equipment W/Pedal Switch, Conversion Plug, Pressure Gauge

flash sale iconLimited Time Sale
Until the end
14
32
33

$119.40 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $199.00
quantity

Product details

Management number 218655644 Release Date 2026/05/03 List Price $79.60 Model Number 218655644
Category

DescriptionA good tool is indispensable for tedious operations. Our hot melt glue dispenser can help you do it. Made of iron and aluminum, and adopting exquisite painted technology, this item ensures that you can use it for a long time. Good performance and simple operation can make your work more efficient. It will be a powerful assistant in your work.DetailsTrapezoidal Base: The solid trapezoidal base can provide additional support to better maintain the stability of the product.Long Power Cord: This 6.56ft power cord allows you to have plenty of disposable lengths, thus reducing the limitation when you use it.Round Corners: The arc design can effectively prevent your skin from being scratched compared with the traditional square corners.Preparation for Operation:1.Confirm the safety protection measures.2.Check if the machine is 110VAC and make sure that the pressure will not fluctuate.3.See if the temperature of the plastic bucket is set at about 302°F(different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier).4.Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.5.Check if the air supply system is basically dry and the air pressure is stable6.Power on and test the circuit of each part.Boot Steps:1.Connect the power and turn the power switch to “ON”.2.Check if the temperature of the temperature controller is within the above range.3.Check whether the pressure relief is turned in the direction of pressure holding.4.Connect the origin, set the pressure value, and start the operation.Shutdown Steps:1. Release the foot switch to cut off the main power2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0.SpecificationColor: BlueModel: YT-X001Material: Iron and AluminumSurface Treatment: Painted, Sprayed with TeflonStyle: ModernShape: RectangularNumber of Items: 1Assembly Required: YesMount Type: CountertopVoltage: 110V 10APlug Model: PSB-10Max Power: 1250WMax Voltage: 10A 125VSol Speed: 3kg/h, 6.61lbs/hSolvent Capacity: 3kg/h, 6.61lbs/hMaximum Viscosity: 10000 CPSPlug Type: US StandardPower: 800WWorking Temperature: Over 150°C/302°FTemperature Control Range: 150-200°C/302-392℉Pressure Range: 4~10kg/8.82~22.05lbsLength of Power Cord: About 2m/6.56ftPackage Included1* Hot Melt Glue Dispenser1* Pedal Switch1* Conversion Plug1* Pressure GaugeNotes1.Please always wear safety gloves, goggles, and long-sleeved work clothes(not included) during use to avoid burning hot liquid hot melt adhesive. Before heating the melted glue, the pressure of the storage tank must be released first. After adding the sol, the lid of the glue tank must be locked.2.Please note that the gas circuit should avoid too much water vapor entering. The capacity of hot melt adhesive should not exceed one-seventh of the capacity of the storage tank. 3.In order to achieve a better result and avoid damage, please set the minimum air pressure to 8.82lbs and the maximum temperature to 392℉.4.Please note that this product needs to be used with an air compressor, so you need to prepare it in advance.5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

  • 【110V 10000CPS Hot Melt Glue Machine】800W power, 6.61lbs/h sol speed and solvent capacity, and 10000CPS maximum viscosity can improve your work efficiency, save labor and cost.
  • 【Multiple Functions】It is mainly used for gluing in product processes, as well as other liquid precise points, injection, and application to the exact position of each product, and can be used for dotting, marking, circular or arcing.
  • 【Adjustable Design】The temperature can be adjusted in the range of 302-392℉, and the pressure can be adjusted in the range of 8.82-22.05lbs, which are very convenient and conducive to making more beautiful and standardized items.
  • 【Exquisite Workmanship】The shell of the product is painted, and the aluminum barrel is sprayed with Teflon to prevent adhesion, so this item is smoother, brighter, more wear-resistant, and corrosion-resistant, thus extending its service life.
  • 【Application】This product can be widely used in manufacturing plants, workshops, construction sites, and stores for shoemaking (insole spray, sponge wrapping), toys (adhesive, fixation, insulation), DIY design, and other manual or semi-automatic products that need glue.
Color Blue
Material Iron and Aluminum
Manufacturer HCYHSLH
Power Source electricity
Item model number YT-X001
Included Components 1* Hot Melt Glue Dispenser 1* Pedal Switch 1* Conversion Plug 1* Pressure Gauge

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review